|
INBOARD/IO WINTERIZE |
|
$225.00 |
|||
|
plus parts |
|||
 |
Winterize Engine | ||
|
|
Add Fuel Stabilizer | ||
|
|
Flush Engine with fresh water | ||
|
|
Change Engine Oil | ||
|
|
Change Fuel Filter, inspect lines | ||
|
|
Lubricate steering and controls | ||
|
|
Remove thermostat and fill with non-corrosive anti-freeze | ||
|
|
Fog engine with protective lubricant | ||
|
|
Inspect hoses, exhaust, clamps, linkage, power steering, transmission, charging system, cooling system and belts. | ||
|
OUTBOARD WINTERIZE (V-6) |
|
$225.00 |
|||
|
plus parts |
|||
|
4 cyl. and smaller slightly less |
|||
|
|
Add Fuel Stabilizer | ||
|
|
Check power trim | ||
|
|
Check oil injection | ||
|
|
Pressure test lower unit | ||
|
|
Replace lower unit oil | ||
|
|
Flush engine with fresh water | ||
|
|
Fog engine with protective lubricant | ||
|
|
Remove prop/lube shaft | ||
|
|
Lube steering and controls | ||
|
SERVICES WE OFFER |
|
|
Hauling, Storage, Dockage, Repairs | ||
|
|
Engine Rebuilding, Inboard I/O & Outboard | ||
|
|
Outdrive & Lower Unit Rebuilding | ||
|
|
Engine Repowering | ||
|
|
Repairs of All Accessories | ||
|
|
Fiberglass & Gel Coat Repair |
||
|
|
Complete Boat Detailing | ||
|
|
Custom Canvas & Canvas Repair | ||
|
|
Alum Skeg & OD Welding Repairs | ||
|
|
Custom Electronics Rigging | ||
|
|
Custom Engine & Boat Rigging | ||
|
|
Winterize additional systems: $75.00 per system Plumbing, marine heads, baitwell & wash down systems, air conditioning | ||
| * |
These prices do not include spring commissioning |
|
SHRINK WRAP |
|
$12 per foot |
||
|
Wide Beam and Fly Bridge Slightly Higher |
|
PRESSURE WASHING |
|
Bottom $3 per Foot |
|
BOAT HAULING |
|
Hydraulic Air Ride Trailer |
||
| Licensed / Insured | ||
| See our Hauling Page |
|
WINTER STORAGE |
|
1$600 1 |
||
|
|
||
|
Boats up to 35' - up to 9' Beam |
||
| Includes: Haul Out | ||
| Hull Inspection | ||
| Spring Launch |
|
STERN DRIVE SERVICE |
|
$295.00 |
|||
|
plus parts |
|||
|
|
Remove outdrive | ||
|
|
Inspect transom assembly | ||
|
|
Lube all steering/trim components | ||
|
|
Pressure test outdrive | ||
|
|
Remove prop/lube shaft | ||
|
|
Replace water pump, impeller and gaskets | ||
|
|
Change lower unit fluid | ||
|
|
Check and grease universal joint | ||
|
|
Store indoors | ||
|
|
Re-insall in spring with new gaskets/o-rings | ||
North Shore Yacht
Sales © 2004-2008
Site designed and maintained by Bridge Lane Web Design